FREEDOM Air : ScanApp i v2.0.12.6 – DOF Help Center

Click the link below to download the ScanApp i installer.

🔗[Download ScanApp i(Air)]

When a new version is released, a popup will appear upon launching ScanApp i, allowing users to immediately download the latest installer. (Available for users on version 2.0.10.3 or later)
- The downloaded installer can be used to update the application.
A new option has been added to reboot the PC after installing the software.
A system reboot is recommended after installation for optimal performance.
After PIM Align, scan data can now be converted to the scan body of the implant library selected in Sync.
During PIM scanning, both base data and converted scan body data can now be extracted.
A scan checklist guide has been added to the scanner warm-up stage, and users can now skip the warm-up step. (Scanner warm-up is recommended for optimal scan accuracy.)

When the order form (indication) is modified in Sync during scanning, the changes are now reflected in the ScanApp i scanning process.
A warning message is displayed when the number of scan frames exceeds the recommended limit.
The ScanApp i settings window can now be opened even without a scanner connection.
The occlusion step has been separated, and up to four occlusion scans can now be performed.
Scan data is automatically saved when exiting ScanApp i and automatically loaded when reopening the same project.
Fixed an issue where ScanApp i was minimized when clicking the [Settings] button in the top-right corner.
Fixed an issue with abnormal scan sounds when scan interruptions occurred.
Improved data acquisition in bleeding areas during edentulous scans.
Expanded the smart filter area to improve data acquisition performance.

Data viewing functions and the Reliability Map On/Off option have been added to the Side Toolbar on the right side of the screen. (D-pad is not supported in the Side Toolbar.)
PIM Scan Guide has been added.
Alert messages are displayed when the scanning distance is too close or too far during PIM scanning.
Manual alignment now supports 1-point and 2-point matching.

The HD function has been temporarily disabled for stable improvement and quality enhancement through redevelopment.
An intermittent issue where the occlusion color map was disabled after data build has been improved.
An issue where colors were displayed abnormally during the first scan after launching ScanApp i has been improved.
The issue where data disappeared after occlusion alignment failure has been fixed.
The crash that occurred when stopping occlusion scanning has been improved.
Connection stability during PIM scanning has been enhanced.
The issue where results disappeared and could not be recovered after completing PIM scanning has been fixed.

New languages have been added. (Ukrainian, Japanese, Chinese)
Material recognition and Smart Filter functions have been reorganized into scan mode features.
(Intraoral Mode / Edentulous Mode / Model Mode)
Manual occlusion matching functionality has been added.
An automatic reconnection feature has been added when the scanner connection is lost.
An Auto Recovery feature has been added to restore scan data even if the program is unexpectedly terminated.
A screen zoom level adjustment feature has been added to the settings menu.
A multi-scan function has been added to the PIM stage.

Smart Filter has been updated.
- Usability with the small tip has been improved.
- Smart Filter is now enabled during the occlusion stage.
Some Help Guides have been revised.
When deleting the data used for initial occlusion alignment, the corresponding occlusion data will also be deleted.
The minimum HDD system requirement has been reduced from 100GB to 20GB.
The color scheme of Mono mode has been updated.

- A new Edentulous Mode has been added, which automatically activates during edentulous scanning.

- Fixed an error that occurred when changing the tip or finishing a PIM scan.

- Fixed an error that occurred when selecting the occlusion stage with the mouse after entering the occlusion stage.