Skip to main content
한국어

- PIM Scanbody - Compatible MUA Guide

Chloe Im (임현지)
Updated

📌 PIM Scanbody Compatible MUA Specification 

📌 List Of MUA Compatible With The PIM Scanbody  

📌 How To Check PIM-Compatible MUA In DOFSync 

 

📌 PIM Scanbody Compatible MUA Specification 

 

This information is essential to prevent scan errors and failed connections as of September 2025.

DOF's PIM solution scans by directly attaching the PIM scanbody to the multi-unit abutment (MUA) in an All-On-X case.

It is essential to verify in advance that the PIM scanbody is compatible with the MUA of the implant system you intend to use.

⚠️If the MUA specifications do not match⚠️️️

If the MUA screw specifications do not match the PIM scanbody, the following issues may occur.

  • Driver or scanbody misalignment prevents connection.
  • Lower accuracy due to scan position distortion.
  • Screw damage caused by loose connection.
  • Failure of the entire PIM scan and retry.

 

1. PIM-Compatible MUA Specifications 

The PIM scanbody is compatible with MUAs that meet the specifications below.
Before use, ensure that the MUA specifications comply with these requirements.

  • MUA head diameter: ≤ ⌀4mm
  • MUA head height: ≤ 3mm
  • Platform diameter: ≥ ⌀4.2mm

 

📌 List Of MUA Compatible With The PIM Scanbody (as of September 2025) 

 

Screw Specifications (M Size) PIM KIT Types Compatible Implant Systems (Examples)
M1.4 
(Diameter 1.4mm)		 NB Type

- Nobel Biocare™ 
- OSSTEM 
- Astra Tech EV (MultiBase) 
- DENTIS 
- MegaGen (N-Type MUA) 
- NeoBiotech
M1.6
(Diameter 1.6mm)		 DO Type

- DIO Implant
M1.8 
(Diameter 1.8mm)		 DT Type

- Dentium 
- Cowellmedi
- C_Tech
※ The listed implant systems are not officially affiliated brands of our company and are provided for reference purposes only to indicate product compatibility. All trademarks are the registered trademarks of their respective owners.

 

⚠️ Required Checks Before Use ⚠️

  • Even within the same brand, screw specifications may vary depending on the MUA type.
    e.g. MegaGen N-type ≠ S-type
  • Brands not listed in the table (e.g., BioHorizons, Hiossen, Bicon, etc.) may be partially compatible in some cases. For accurate compatibility confirmation, please contact Customer Support or refer to the product manual.
  • If the screw specification (M size) does not match, issues such as improper seating, scan failure, or screw damage may occur.
  • If compatibility is uncertain or if you are using an implant system not listed in the table,
    please contact DOF Customer Support for assistance. (📞 Go to Customer Support)

 

📌 How To Check PIM-Compatible MUA In DOFSync 

 

During the DOFSync project order creation step, MUA libraries compatible with the PIM solution can be reviewed.

Follow the instructions below to check the currently available PIM-compatible MUA libraries.

🔍 Click to enlarge 
🔍 Click to enlarge 

 

The MUA libraries provided in DOFSync have been directly verified for compatibility by DOF, and the list is continuously updated.

To add an MUA library not listed above, please review the related documentation below first, then contact DOF Customer Support.

 

Related articles

Privacy Policy
한국어