- Using PIM Data In exocad

📌 Adding The Implant Library In exocad  

📌 Using PIM Data In exocad 

  L Exporting PIM Data To exocad From DOFSync 

  L Importing PIM Data In exocad  

📌 Set PIM Project Indication 

📌 Adding The Implant Library In exocad 

To use PIM data in exocad, the implant library selected during PIM project creation must be added in advance.

1. How to check the PIM project library 

In DOFSync, check the name and details of the implant library that was set during the creation of the PIM project.

2. How to add the implant library in exocad 

Add the implant library folder confirmed earlier to the implant library path in exocad.

• exocad library path : exocad > DentalCADApp > library > implant 

📌 Using PIM Data In exocad 

1. Exporting PIM Data To exocad From DOFSync 

When DOFSync is linked with exocad, PIM data can be imported into exocad more easily and efficiently.

- Linking DOFSync with exocad: 

Follow the steps below to set up the integration between DOFSync and exocad.

- Exporting PIM data from DOFSync to exocad: 

After completing the integration settings, PIM scan data can be exported directly from DOFSync to exocad.
All scan data and MUA position information are automatically applied in exocad during export.

2. Importing PIM Data In exocad 

Copy the dentalProject file path of the PIM project, then open exocad DB or CAD to automatically load the PIM data and proceed with the CAD task.

- Checking the dentalProject file path: 

Use the steps below to locate and copy the path of the dentalProject file to be imported into exocad.

- Importing PIM data in exocad DB: 

Open the dentalProject file located in the copied folder through exocad DB to load the PIM data.

- Importing PIM data in exocad CAD: 

Open the dentalProject file located in the copied folder through exocad CAD to load the PIM data.

📌 Set PIM Project Indication 

To design an AOX prosthesis using PIM data, the project indication must be configured correctly before starting the design process in exocad.

1. Setting the AOX Prosthetic Type 

To create an AOX prosthesis, the implant positions and adjacent tooth types must be configured correctly.

Refer to the guidelines below and set the appropriate prosthetic type for the adjacent teeth according to the prosthetic type assigned to the implant positions before proceeding with the design.

Implant Position Tooth Type	Adjacent Tooth Type	Required Selection
Anatomic crown	Anatomic pontic	Antagonist   Adjacent Tooth Connector
Anatomic waxup	Pontic waxup
Bar pillar	Bar segment

Refer to the document below for instructions on changing the indication settings of a PIM project in DOFSync.